I made all the casing for the interior of my house with this method. Super simple 1x4 ripped on the table saw to have a 7/8” tall backband. This method of making it “one piece” helps avoid future cracking when the material moves due to humidity and temperature. We cut right through any nails that may be in the ends when we cut the miters without any issue. It gets assembled with #20 biscuits and makes for a very stable miter. The jig is a simple stepped piece of Formica that is coated with paste

And just like that, I put that entire window casing together for a double window without a single nail. Or at least not until the end. The window trim had to be nailed in place but it came out good. I prefer to build the entire casing before installing it. What's your preference? Home improvement, project DIY tips and tricks for you! #carpentrytips #construction #contractor #tipsandtricks #HomeImprovement #hacks #carpentry #builder #deck #tools #diy | Your Favorite Contractor

Installing an American Craftsman window with proper air and water sealing using Zip Tape and dialing in accuracy with the Sola digital level.A clean install starts with the right prep and the right tools. I see a lot of installs where:– Flashing is rushed or skipped altogether– Windows are set ‘level’ but the opening is out of square– Shims are ignored or overused, causing binding or gapsUsing a digital level takes out the guesswork, and sealing with Zip Tape ensures long-term protection. It’s n